AsteroidOS mostly supports watches that come stock with Wear OS, which is a modified version of Android, which, guess what, runs a Linux kernel. These watches are on the more powerful end of the computing spectrum. As you say, there are a lot of smart watches that use pretty lean MCUs, but those aren’t running AsteroidOS or Wear OS, as noted in this FAQ entry.

Downvotes are to show that the content does not contribute to discussion. This comment is not related to the top-level post, and looks to be low-effort trolling, so it is not contributing to discussion, and deserves downvotes.

I used to have scripts like that, but eventually switched to ssh aliases. You can set up an alias for each machine in ~/.ssh/config with lines like this:

Host p1
    HostName 192.168.1.123
    Port 22
    User pi

Then access with ssh p1. Slightly more typing, but avoids adding more commands to your $PATH. Also has the benefit of letting you use the same alias with other ssh-related commands like sftp.

Automatics also allow for engine braking. From a quick search, it sounds like a toss-up as to whether that triggers brake lights. Regardless, the article mentions the benefit is not only from cars slowing down, but also from indicating that a car is preparing to stop or “that a stationary vehicle might initiate movement”. Neither of those can be done by an engine brake, so front brake lights would still have a benefit even with a driver that likes engine braking.

I feel like you may have misunderstood the article. It’s talking about how support is increasing for dedicated Copy keys, and that programmable keyboards make it easy to use dedicated Copy keys. The article does not mention changing the behaviour of Ctrl-C.

Yes, but not all clients expose dependent tasks (which is sadly a common issue with open standards: they aren’t always properly implemented). I’m using Tasks.org on my phone (which supports dependent tasks), synchronizing to a Nextcloud server with the Tasks app (which supports dependent tasks now, but didn’t for a long time), which also syncs to Thunderbird (which does not appear to show dependent tasks as dependents).

Edit: remembered that the Nextcloud Tasks app has long supported dependent tasks. I was thinking of recurring tasks, which it does not support. Again, open standards aren’t always fully implemented.

I think CalDAV (which uses the iCalendar format) may be the closest thing. It covers calendar items, obviously, but also task and journal items.

It sure feels like we’re at the peak of the Gartner hype cycle. If so, the bubble will pop, and we’ll end up with AI used where it actually works, not shoved into everything. In the long run, that pop could be a small blip in overall development, like the dot-com bust was to the growth of the internet, but it’s difficult to predict that while still in the middle of the hype cycle.

Relevant XKCD. Humans have always been able to lie. Having a single form of irrefutable proof is the historical exception, not the rule.

And here I was thinking of https://xkcd.com/664/

Also worth noting this article is nearly five years old. Rust’s first stable release was nearly nine years ago, so its (stable) age has more than doubled since then. I expect Rust would look a lot more mature if the article was written today.

Thanks for the update and graphs. That is an amazing improvement. In the “after” plot, it looks like any acceleration from the train is well below the noise level of your accelerometer. So, within the limits of your measuring equipment, you’ve effectively eliminated all train vibration. If I were in your place, I would declare success and move on with life! Don’t even bother with foam and rubber feet, because this configuration is working great.

But you could analyze further if you really want; there could be some train signal hiding in all that noise. Since there’s periodic noise in the Z axis, you could take a reading during a still time (computer off, no trains) and see where your spikes are in the frequency domain. Then you could apply a filter (or filters) to cut out that periodic noise.

But unless you’re really into learning about signal analysis, I’d say you could skip it.

None of the included experiments look to be exactly what you need. For characterizing your isolator, the included Acceleration Spectrum is close, though it records continuously, making it difficult to use to record impact response. For evaluating actual train vibrations, the user-defined Integrated Acceleration might be a start, but it doesn’t include the filtering needed to get good information. You could define your own experiments, but that’s probably even harder than analyzing the CSV data on your computer. At least on your computer you can change your analysis freely and immediately see results, rather than re-running the experiment every time.

Wow, I hadn’t heard of phyphox before (hadn’t even noticed @khorak@lemmy.dbzer0.com mentioned it in the OP). That’s very cool and I’ve installed it now.

I work in railway noise and vibration mitigation, and @scrion@lemmy.world has given you a great starting point. When we build rails and want to mitigate ground-borne noise and vibration (typically up to ~200 Hz), we generally mount the rails on soft pads and add extra mass to isolate the rails from the surroundings. The exact same approach will work at your computer. We don’t typically use tuned mass dampers for ground-borne vibration, so I think that will be overkill for you, but you can try if you like.

I wanted to suggest that, in addition to the feet/foam/plywood, you can also add a big chunk of something heavy to help with isolation. Like put a heavy rock on top of the foam, and your computer on the rock. The trick is this: if k is the stiffness of your foam, and m is the mass of everything on top of the foam, then your isolating frequency is at √(2k/m). All frequencies above the isolating frequency will by mitigated (the further above, the more they’re mitigated), while all frequencies below will be amplified.

(Quick aside if you actually want to calculate frequency with √(2k/m): check that your units for k and m are compatible, you should end up with a result in units of 1/s, which is actually radians per second, then multiply by 2π radians per cycle to convert to Hertz).

When it comes to measuring results, since your problem is in low frequencies, you can probably use your phone’s accelerometer assuming it reads fast enough (the sample rate must be at least double the highest frequency you care about). Mount it as rigidly as you can to your computer, since if the connection is soft, the phone will be in its own isolating system. The quickest way to test your isolator would be to hit close to the base with a hammer; impacts excite a wide range of frequencies equally, so in the frequency domain you should see vibration amplitudes following a shape something like these.

But as @scrion@lemmy.world notes below, you don’t really care about your isolator’s response, you care about what trains are doing to your computer. However, he said one thing I disagree with: it’s not the amplitude of the acceleration that you care about, it’s the amplitude of energy, and therefore velocity. This article gives a good introduction to ways you could analyze that. But now we’re getting way in to the weeds on what should be a simple project!

One last aside: if the vibrations in your building are bad enough, you could raise it as an issue with the metro operator. The US Federal Transit Administration sets standards that are commonly followed even outside of the US (see Table 8-1 in their Noise and Vibration Manual); if your measurements show vibration exceeding those limits then they might pay me to fix it :D.

At a glance, it looks like Aegis generates standard TOTP tokens, which means there’s a lot of software that can do the same thing, so you don’t need to emulate Aegis. I use pass-otp (an extension to pass), but that’s command-line-only, and a lot to deal with if you’re not already using pass. From a quick search, it looks like Keysmith and OTPClient are decent graphical alternatives. From another quick search, OTPClient is available in Ubuntu 23.10.

Edit: Re-reading your post, your issue is that you don’t like logging in on your phone, right? But Aegis just provides the code, you should be able to use the code from your phone to log in on your computer. TOTP codes are only affected by the secret values and the current time, so the code generated on your phone can be used on any device.

From the article:

The researchers have so far been unable to determine precisely how Krasue gets installed.

So no one knows yet. But I feel that the existence of malware in the wild is newsworthy, even if we don’t know how it got there. Regardless, you and I probably don’t have to worry about it unless you’re a Thai telecom.

one of the Kens asks to be on the Supreme Court, and Barbie says not until a woman in the real world gets that level of power.

I’m afraid your memory is a bit off. A Ken asks for a supreme court seat, President Barbie says “maybe one of the lower circuits”, and shortly thereafter the narrator says something like “maybe one day the Kens will enjoy all the rights that women do in the real world”. The movie certainly did not erase Ruth Bader Ginsburg and Sandra Day O’Connor.

You must be thinking of a different grant, or you’re in a province where the carbon price is not federally run. The federal Climate Action Incentive payment is disbursed to everyone.

Tell us more about what you’re thinking of building/drawing. I like FreeCAD, but it’s also quite complicated, depending on what your goals are.