I didn’t use it much yet so cannot tell if bluetooth is working properly. Also, I’m really not a linux expert so can be wrong but the fact that it was working perfectly on fedora and not on pop could indicate that the différence in kernel support for your driver could be the culprit.

Did setup a dual boot on a 2014 MacBook pro recently and also had issues with wifi. What solve the problem for me was to use an older kernel which fully supported wifi card driver. Can’t recall now which kernel i used but can check later if you don’t find the information.

What protocol do you use? Using ZigBee, my sensors (temp, leak, doors) last about 2 years

That might depends on how your AC is working, I recently did the same at my dad’s house and run into issues because the temp control for the unit is reading from the remote. So when I sent infrared command to turn off unit, it worked as expected for some minutes then turned back on because remote sent back command as temp wasn’t meet. Still need to do a lot of testing to find a way to make it work, might need to disable remote and use some temp sensors for the triggering part but not sure how that will work, might need to use some hysterisis friendly climate addon for that…

I am mainly reading on iPad due to screen ratio, I’m self hosting yacreader library and use yacreader app (server is free, app is one time payment on iPad, does have an android/windows client but not developed as iOS version). If I remember correctly, I think there is also Panel on ipad that do the same (would need to check). On android, I need to check and can answer tomorrow (almost 1am here), could be cdisplayex but unsure.

i don’t know any on computer but some app offer that on android/ios. i guess they look for some kind of contrast pattern to determine each frame.

Did try and it does work really well on some but not all garphics novel / comics

Does it have access to boot menu? If so, change boot order so it goes to usb first. You will then only need to create a bootable usb stick with Linux on it

I’m using home assistant, with mqtt which acts for many things and I get notification in different way depending the needs. Could be home assistant app or telegram or lighting up some light or sending voice messages to a speaker. All notifications are triggered by automations looking at states. Haven’t done it but automation could be re launched automatically until (for exemple) I press a button or responding to telegram message

https://hackaday.com/2024/11/20/with-core-one-prusas-open-source-hardware-dream-quietly-dies/#more-734822

(I’m not English native)

One of the latest Prusa printer is closed source If I remember correctly Core xy

You are not completely wrong, they have one printer with closed sources.

This is mainly because consumer 3d printer have been developped by 3d printing enthusiast first and not a company, Prusa which was leader for some time used a lot of open sources project to build their printers. As it’s getting mainstream as time goes by more and more companies shows up with closed sources project sadly.

It is mostly targeting french content (RD is a french company), so most user may have not see a big change. For french, RD has become muche less attractive because RD has banned biggest french torrent site and 1fichier files are scanned, if file matches hash content from movies/series it will blocked download.

And if that’s doesn’t work, message me and we will try to solve this out

Have you tried a Factory reset?

Not the answer you are waiting but there is something wrong with your shield, I have a 2015 and 2019 Shield and both are just very good even if the first one has nearly 10 years

Can second that email works great to send Epub, never had issues in years

I’m not 100% sure but this might also depend which OS you are running on your pi. Did change from SD card to SSD few years back for my home assistant setup (now running with a mini pc) at the time I went for a geekpi adapter (can’t recall exact model).

Try a quick ducduck search “sata adapter #yourOS#” and see if a list come up. Here is one for HA (but surely more models are compatible than the ones listed here) https://community.home-assistant.io/t/working-usb-enclosures-and-adapters-with-hassos/212763

Edit: as for SSD, I went for Samsung EVO model

Sidenote: all SSD will be more reliable than a sd card because they are less sensitive to rewrite counts

I don’t see why you think those are web based, usually people run this at home but glad you find what you are looking for

As far as photo librabry, you can compare the different solutions at https://github.com/meichthys/foss_photo_libraries