We adopted a pair of kittens last year after one of our two brothers passed, they don’t leave him alone.

Wake up to variations of this or them all piled on a chair in the living room.

The one with more white is particularly obsessed, practically the orange guy’s shadow.

It did get abandoned early in the series if I recall (been a while) and from what I recall he did tweak the results after Boomer so that more or less only he could tell so maybe it did work, the first “results” before her were totally fudged so who even knows. I had also forgotten that

I haven’t looked at Nix in detail but you got me interested for 3d printers in particular, already have my klipper config in git if an SD card fails on me, going to have to look at doing that for the os too.

Yeah there’s absolutely a rating to look for and N95 is part of that, stateside, you have niosh ratings, you’ll see these wrt industrial ppe, but there are ratings for use with CN and CS gas. My experience with them is the chemical cartridges usually have a p100 filter combined with them for particulate too. Organic Vapour & Acids are easy to get a hold of (Used these when i worked in O&G), I don’t know how well they’d work against teargas unfortunately.

I will 100% recommend north full face, a half mask is probably better than nothing but the full face gives you eye protection too. I didn’t personally like the 3m style masks, but it’s all down to personal preference, just make sure it fits correctly.

FiiO has some that aren’t super pricey (they run a range, their entry level stuff is usually really affordable), their amps and DACs are pretty solid in my experience so I’d totally look into one, second hand would definitely be an option there too.

Yeah, was like just over a year later, they still are the independent & small label place imo, I don’t have faith that’ll last forever unfortunately. They still are my go to place for discovery and exploration, bandcamp daily still has some interesting finds, I just make sure I download my purchases.

They sold it to Songtradr in 2023, there were “layoffs”, a lot of the employees involved with unionisation while Epic controlled the company were fired (in the wiki page toward the end of the history section).

It’d be coated, but it’s from processing, cold rolling metal generates a lot of heat, especially going that thin (thinnest I was around often was ~0.2mm), we’d often temper the material after processing, mainly for surface finish, mill rolls would be sprayed with lubricating coolant really close to what you’d see in use on a milling machine. This was with steel but same principle applies, pretty sure the lubricant we used is also labeled for use on aluminum mills, but you’d use food safe stuff for kitchen foil.

Industrial cooling towers are usually evaporative in my experience, smaller ones are large fans moving air over a stack of slats that the return water is sprayed or piped over and the collects in well for recirculation, larger ones afaik (like what you’d see at power plants) operate the same idea. Top ups and water chemistry is all automated.

Those systems have operation wide cooling loops that individual pieces of equipment tap into, some stuff uses it directly (see that with things like industrial furnaces) but smaller stuff or stuff that’s sensitive you’ll see heat exchangers and even then the server & PLC rooms were all air cooled, the air cons for them were all tied into the cooling water loops though.

From a maintenance POV though, way easier to air cool, totally seen motor drive racks with failed cooling fans that have had really powerful external blowers rigged up to keep them going to the next maintenance window. Yeah, industrial POV but similar idea.

Afaik, almost every browser uses “Mozilla/5.0” as part of the user agent, Mozilla mentions it as well in developer docs about User agents, it’s a historical compatibility thing apparently.

I bought a Brother colour laser last year (which on the outside looks identical to the monochrome one I bought 17 years ago that lives with my parents), zero issues, which pretty much has been my experience with printers on linux (also tried a ~5 y/o & 25 y/o HP LaserJet, one being the cheapest thing I’ve ever used, other being old office equipment, think I tried the Epson ecotank and photo printer my mil has as well)

It’s not terrible advice tbh, even just hand sketches are solid for getting ideas down, makes it easy to translate to cad. It at least helps me think things through and the like.

Get a few pencils with different leads (some harder stuff like 2-4H and an HB) and some nice paper and you’re good, but really anything works, totally have a mockup of my garage on a whiteboard planning where I want to put stuff.

As for cad packages, freecad, as far as I’m aware there are some architecture workbench plugins, and there’s a tech drawing workbench. Coming back to cad after a while I found it super easy to pick back up (coming from solidworks at least)

Straight arch works great with nvidia cards, gaming was my last hitch too, only thing I really miss is HDR in games, but it’s a tradeoff I’m willing to have (had bad times with gamescope and nvidia, I’m content to leave it alone for now, things change rapidly anyhow)

I’ve seen mention that stuff like the odbc connection manager have parts dating back to 3.1

Haven’t looked into it but do shops offer lube analysis services? Yeah you could send out your own sample to a lab, having it as a shop service would be way more accessible to people.

Though, in my experience, getting people to commit can be a pain, lots of “yeah I know we have a long p-f interval and it’s super noticeable before it functionally fails, but it’s not that much effort so I’m doing needless maintenance anyhow just in case”, which end of the day you do you.

I’ve used Thunderbird since forever as my go-to client, I used mutt as well for a while and that met my needs pretty well.

I’ve always known your world is complex, working closely with accountants and actuaries the last 4 years doing data applications further confirmed that, there’s some legitimately complex math that shows up, and it’s a lot of work to model that correctly.

“It’s just a …” Is a redflag to me, project’s going to be a gongshow.

I find that mentality of not trying to understand the problem and its context totally counter to the engineering method.

Personally, recommend forgejo, gitlab has a lot of features I didn’t need and I found the upgrade process if you didn’t keep on top of it annoying. Forgejo actions are pretty similar to github ones and setting up runners is super straightforward.

The ones I have have some speakers aimed at your ear to fill in that part, actually works really well. I can’t stand the ear buds you physically insert into your ears, the rubber tipped ones, these have been good to replace my on ears for activity. Plus you can hear what’s around you which is why my partner gifted me them.

He won’t even get a security clearance, how can anyone trust him to run a government?