Very ingenious approach too!

deleted by creator

Yes, exactly. But at least you can have an e2e encrypted relay as syncthing does.

This problem is similar to the one faced by Matrix on iOS, and they provide the notification service. All of your conclusions apply though.

This could be worked around, in theory

Cool project, but Rust is a cool language :)

Interesting. I’m using Argo, there may be something similar for it

It’s because of this:

$ dig +short insights.navidrome.org
209.141.42.198
$ dig -x 209.141.42.198

; <<>> DiG 9.20.11-4-Debian <<>> -x 209.141.42.198
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12665
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;198.42.141.209.in-addr.arpa.   IN      PTR

;; ANSWER SECTION:
198.42.141.209.in-addr.arpa. 30 IN      PTR     demo.navidrome.org.

;; Query time: 208 msec
;; SERVER: 192.168.1.1#53(192.168.1.1) (UDP)
;; WHEN: Sun Mar 08 17:13:34 CET 2026
;; MSG SIZE  rcvd: 77

In practice, demo and insights are on the same IP, whose reverse points to demo

Just don’t go below 4 cores of x86 and you’ll be fine

My greatest problem is that the CPU load is too high and I ran into an issue with iSCSI that would occasionally peg one core to 100%. It would also make nodes NotReady when too many PVs were scheduled

Thanks, I will!

Thanks for the feedback! So not what I’m looking for

Thanks!

Which CSI?

Thanks! A bit more involved that I’d have thought but still worth considering! Could you update us after your evaluation?

Thanks

Found a Reddit thread that says that LINSTOR has a lower CPU usage (which is my main gripe with Longhorn). Might as well try this and report back. Is there a good way to migrate PVs and PVCs?

I used to use Ceph at work and I’m a bit reluctant to use it at home. Don’t get me wrong, it’s really cool, but those were beefy nodes, and I only have 1 Gbps between nodes

Has anyone tried this https://github.com/awslabs/mountpoint-s3-csi-driver?

Perhaps with a Garage DaemonSet as a backend?

2. With microk8s you can, but you’ll need Windows Server Datacenter (iirc) and the ecosystem is a mess… there are not many images built for Windows and, worst of all, the image Windows version must match the host

I was looking for a solution that lets someone use Yggdrasil (crypto routed network overlay) over LoRa. The basic idea is to use Yggdrasil multicast and use Reticulum RNodes I with tncattach.

I fear that there’ll be too much overhead (the MTU is only around 500 bytes, and IPv6 minimum MTU is 1280) because of IPv4 fragmentation

Links:

• https://unsigned.io/guides/2018_07_01_using-rnode-as-a-lora-based-wireless-nic.html