I am using this one. Texting or messaging my phone (on anything that makes a notification popup) with the text “fmd password location” gives me GPS coords. More than enough for me, and works even from a borrowed stranger’s phone.

Setup steps require ADB though, because in the phone ecosystem getting “unusual” permissions usually requires business deals with Google/Apple.

Thing is, its EOL, per Asus. Does this mean that it won’t be supported on OpenWRT for much longer?

OpenWRT tends to support devices longer and better than the OEM, but it depends on the popularity of the chipset inside the router.

Many different routers by different companies are almost identical internally, because they use the same chipset. Eg the RT-AC3100 seems to be a bcm53xx variant, of which OpenWRT supports a few dozen products. Support will probably only be dropped when every single one of those devices goes EOL and several years pass (ie no people left contributing/maintaining it and the builds break somehow).

Router chipsets can be very long lived. Many new devices use decade old chipset designs. Some chipset families have almost identical chips released every few years with slightly different peripherals, clocks & pinouts; but are supported by the same kernel drivers.

(This is all much better than the world of mobile phone hardware support. Maybe it’s because of different market pressures? Not to mention you don’t have a monopoly that benefits from keeping the hardware fractured. Imagine if people could make a competitor to Android that works across most devices out there)

As far as I understand, wireguard is designed so that it can’t be portscanned. Replies are never sent to packets unless they pass full auth.

This is both a blessing and a curse. It unfortunately means that if you misconfigure a key then your packets get silently ignored by the other party, no error messages or the likes, it’s as if the other party doesn’t exist.

EDIT: Yep, as per https://www.wireguard.com/protocol/

In fact, the server does not even respond at all to an unauthorized client; it is silent and invisible.

Read-only, or the ability to edit filenames & upload files?

Read only: as per other answers here, basically any HTTP server. The easiest one I know would be darkhttpd, because it requires no config files and can be run without root.

Read write: I like WFM https://github.com/tenox7/wfm

Every news website is covering it. I think I’ve spotted most of 10 articles around the place.

The law of well-marketed unreleased goods dictates that this vehicle is not going to meet any of the promises mentioned in the articles. I hope to be proven wrong, but just like video games: don’t pre-order, wait for it to come out and be reviewed.

GNOME 2 was fun and easy. It felt like they were trying to learn from the mistakes of Windows and Mac UIs.

Windows update fetches all sorts of things now. If the hardware advertises X device then Windows update will check if it has anything for it. Approved vendors can provide all sorts of guff. Historically that has included drivers that intentionally brick your devices. HP probably packaged up some software that updates the BIOS and got it into the Windows Update DBs.

This is something HP should have handled.

If a bad update is rolled out then it’s the responsibility of the software maker partner (HP) and the distributor (Microsoft), not just one or the other.

Those laptops are THEIR products, not Microsoft’s.

Both Microsoft and HP have branding on their laptops and a responsibility post-sale for the reliability of their systems. Hardware, firmware and OS responsibilities are all party to this chain of failure.

Magazine CDs and DVDs were my bacon.

10 sec

Filthy casual.

My family has a Chiq U58G7P. Warm boots take about 30 sec and cold boots a few minutes.

Don’t try and press any buttons on the remote during this time or for a minute or two afterwards. They might work, 15 seconds later, or they might get ignored. Sometimes your button press inputs get re-ordered too.

Factory resets do work, but then all it can do is broadcast TV. If you let it update and install streaming apps then you will be back to the same problems.

I suspect that it might be running out of RAM and thrashing some poor innocent MMC as swap, but I can’t find a USB ADB port to properly find out (maybe it has one internally?).

“The uploader has not made this video available in your country”

(Australia)

Any other way to see this? Or is this show not freely available (ie you have to pay for it)?

Nice, ty. I’ve only revenged PC firmware, not embedded, so I wouldn’t think of several of those tools.

I know a model of HP inkjet from my childhood that had a service/factory mode where ink checks were disabled. After years of claiming that its carts were empty I was suddenly able to print perfect full-colour pages. RIP HP Photosmart 3110

Congrats :) The idea that a few software bits are between you and getting a pile of junk working is infuriating. Did you extract and modify an image from flash or find a way in live?

Ditto with my printer. Print over LAN: sure. Printer connect to internet: hell no, that’s the first-party version of printer malware.

USB/2.0 (4.0; Gen 2; rv:1.1) USB4.1 Gen 3x3 (FIREWIRE, like RS232)

I am not so sure that it will end up faster or better.

**In theory: **A CPU scheduler should give programs as much CPU time as they want until you start nearing CPU resource saturation. Discord doesn’t need very large amounts of CPU (admittedly it’s a lot more than it should for a text chap app, but it’s still not diabolically bad). It will only start getting starved when you are highly utilising all cores. That can happen on my 2-core laptop, but I don’t have any games on my 6 core desktop that will eat everything. Nonetheless on my laptop I’d probably prefer my games take the resources (not Discord) and I’d happily suffer any reasonable drop in responsiveness of Discord as a result.

I don’t think that a new process (a new dedicated browser-client) instead of a new thread (tab in existing browser) is intrinsically faster or better. CPU schedulers are varied and complex, I wouldn’t be surprised if any differences in performance measurements would end up down in the noise. If anything the extra memory usage might cause more IO contention and memory starvation, making everything slower rather than faster. But this is all conjecture, so don’t give it much credit.

Basically, it’s faster to focus on painting a single canvas than it is to painting 3 at the same time.

I don’t think that’s much of a problem in practice, at least for Firefox: one tab can crash and stop rendering completely (or lock up 100% of 1 CPU core) but the others will keep going in other threads. For the most part they shouldn’t be able to affect each other’s performance.

In practice: What’s the actual metric that you think will be better or worse? I assume responsiveness to typing and clicks in the discord UI?

I’ve never seen discord lag or stutter from causes other than IO limitations (startup speed, network traffic, heavy IO on my machine) or silly design (having to refresh the page after leaving it open all day, I suspect it’s intentionally auto-disabling but I’m not sure). That’s not something that running a separate discord client in a separate dedicated/embedded browser will fix.

https://halestrom.net/darksleep/blog/054_nvme/

Summary: two Silicon Power P34A80’s died within a few months of use, the second one was the warranty replacement of the first. In both cases sectors suddenly became permanently unreadable.

Smart locks are worse. They have all the insecurity of a regular lock, plus more methods of insecurity, plus more failure modes that will shut you out of your house.

“The formerly successful website known as Twitter”

Transactions per second. Bitcoin is slow and expensive to get your transaction “approved”.