I recall the general observation that a lot of Chinese EV companies were being built up, quickly building production capacities that, taken together, greatly exceed demand, each company hoping to be among the few that eventually survive. So that what we’re now seeing would be this show down

Fuck every Axel Springer Publication, which includes Politico

What’s much easier than dual boot on the same hard drive, see if you can install a second hard drive (not too expensive if you buy used), so that Windows can have its own little quarantine cell.

The Mastodon founder, Eugen Rochko, has just announced that “We’ve moved our internal communications from Discord to Zulip at Mastodon”.

https://mastodon.social/@Gargron/116041405748460511

Zulip is probably more focused toward work than TTRPGs, but it can’t hurt to try it. (I haven’t tried it personally, yet.) It is self-hostable.

https://zulip.com/

While on my laptop I have to use some bluetoothctl (I think) with stupid pin-less setup and cannot use KDE’s own bluetooth applet. We’re both on OpenSUSE Tumbleweed. Does rofi-bluetooth help you a little bit with things?

I think the general term for this is “domain sniping” or “catching”. From this, I also found this paid service, catches.io; can’t tell if it or dropcatch is better. They both only charge you when they are successful in catching the domain for you, which is good.

In general, I second the notion that one probably can’t get around paying for a professional, paid service, since one is up against professionalized scoopers (godaddy and the like), who have put a lot of optimization (down to the placing of their servers) into trying to get an edge over legitimate buyers and competing scoopers.

Cool!

Thanks for updating your post with the solution that you found! Best also prepend something like “[Solved]” to the post title.

If you don’t yet have a USB adapter for using NVMe SSDs over USB-3 ports, I’d suggest to buy such a thing first, since they not just make for a simple yet (decently) fast storage expansion solution, but are very useful in all sorts of situations.

It was a bit of a long shot experiment to begin with. The commands I posted can be useful when an audio device suddenly stops working after it has been working initially during a session, but since your problem is most likely about your device not being recognized at any time, it’s not too surprising that they don’t do much. Just worth the try.

Do any of

alsactl clean 0
alsactl clean 1
alsactl clean 2

do anything for you? (The numbers are for sound card 0, 1, and 2. It looks like, if anything, only 0 would be relevant for you, but you can try the others just in case.)

This command cleans the controls created by applications.

https://manpages.ubuntu.com/manpages/questing/man1/alsactl.1.html

There is forum software that’s integrated in the fediverse. Most often I’ve heard about NodeBB, which is open source and one can self-host it for free; there is even a YunoHost package.

What hardware do you currently use and what software do you intend to run on the new machine? And what’s your budget situation?

In any case, I would always recommend to buy used or refurbished hardware. Even if it’s not necessary financially, it’s better for the environment.

That’s very cool indeed – although I dread the moment he starts talking to his followers about Lemmy.

This is in all likelihood the way to go. These instructions from VeraCrypt might lead the way.

Of course, OP should create an exact duplicate of the disk to another drive before making any changes to it.

As an aside, I know that GPT partition tables likewise come with a backup header at the end of the disk. Whether LUKS encrypted devices also have backup headers, I don’t know, but it doesn’t seem so. So, my fellow LUKS users, perhaps you would like to run the following:

sudo cryptsetup luksHeaderBackup /dev/LUKSDEVICE --header-backup-file ~/nas/backups/lenovo_x280.luks.bin

There’s a provision that says the trust structure can be changed without everyone’s consent if the intended change is in the interest of all trustees. Rupert, Lachlan and their team want to exploit this by arguing that the ongoing financial success of the media empire is dependent on it retaining its staunchly conservative editorial line, so that it is in fact (from a financial point of view) in the interest of the three non-conservative children if they don’t get to have any influence. The first judge wasn’t buying it; let’s hope that the others will rule the same way. (One argument in their favor is that the $787 million settlement that Fox News has to pay to Dominion Voting System due to a defamation lawsuit was a consequence of Rupert’s or Lachlan’s die-hard conservative messaging.)

What’s less good: I remember dimly that, should Rupert live long enough (past theö year 2030?), he can change the trust at will again.

The most staggering thing though is that the show has had quite noticeable repercussions on the dealings of the real-life Murdochs. Anyone who would like a long read on all this can check out the Atlantic article linked in the post description.

The Atlantic article that I linked in the post description talks at length about the spicy shit (especially about the family relations and only comparatively little about the legal aspects).

Rather than running a Tor relay, running a simple Tor bridge (e.g. via the browser add-on Snowflake as suggested by @ryokimball@infosec.pub) is probably the best thing to do with one’s home hardware.

Actual relays must suffice certain requirements, according to the Tor project:

Requirements for Tor relays depend on the type of relay and the bandwidth they provide. ==== Bandwidth and Connections ====

A non-exit relay should be able to handle at least 7000 concurrent connections. This can overwhelm consumer-level routers. If you run the Tor relay from a server (virtual or dedicated) in a data center you will be fine. If you run it behind a consumer-level router at home you will have to try and see if your home router can handle it or if it starts failing. Fast exit relays (>=100 Mbit/s) usually have to handle a lot more concurrent connections (>100k).

It is recommended that a relay have at least 16 Mbit/s (Mbps) upload bandwidth and 16 Mbit/s (Mbps) download bandwidth available for Tor. More is better. The minimum requirements for a relay are 10 Mbit/s (Mbps). If you have less than 10 Mbit/s but at least 1 Mbit/s we recommend you run a [/wiki/doc/PluggableTransports/obfs4proxy bridge with obfs4 support]. If you do not know your bandwidth you can use http://beta.speedtest.net/ to measure it.

As for exit relays aka exit nodes, the obligatory advice is of course to not run them at all unless you know exactly what you are doing both legally and technically, and probably only if you’re a foundation or something.

lmgtfy always was needlessly unfriendly, but in the age of search result enshittification, it’s even lost the excuse of technically providing a good solution (at least in cases like this).

Creating a live USB with persistence is lengthy and even the decent tutorials out there vary greatly in their suggested approach, making it perfectly legitimate (even for non-beginners) to ask for guides that others have found helpful.