Removed by mod

I do Bandcamp where I can but end up just yt-dlping YouTube and SoundCloud where necessary, and then I try to ask those artists to put their music in bandcamp or somewhere I can buy a download.

Doesn’t this need an AI disclosure in the title and post per the rules of this community?

I emailed them at support@greenfi.com with basically the message “I can’t login I get this message, what can I do to resolve this”, went back and forth a bunch, did all the annoying troubleshooting reinstalling the app, clearing app data, etc, sent screenshots of the message, assured I wasn’t using a VPN, sent all the details of my phone and rom version, had to poke them when they didn’t respond, got a random message of them saying “we see you were able to gain access” and I had to be like wtf no I didn’t?, told them it worked if I temporarily enabled play protect and said I would switch banks if I couldnt access check deposit which is mobile only, they replied with some justification why play protect is tripping it up, so I told them that I had no issues having play protect off with other financial apps like fidelity and chase bank, and finally got a response from a “supervisor” saying “i refreshed your settings” settings" and it started working.

Not sure if they just whitelisted my account or what, but maybe if enough people complain they will get tired of whitelisting everyone and change course.

I switched away from Ally bank for similar reasons, on my lineage’d pixel 5 with gapps, their app would always fail the login the first time then succeed the second time for no reason.

Then the bank I switched to, greenfi (coastal community bank) completely blocked login unless I had play protect (in Google play) enabled, which allows Google to uninstall any app from your phone without asking if they decide it’s a “security risk” or whatever - I can totally imaging them deciding that ReVanced / morphie / patched apps that block their ads to be a “security issue”. Luckily greenfi was more understanding and they did something that allowed me to log in again.

I completed a 300 mile move yesterday, and my homelab was one of the least stressful parts thanks to my pre-emptive downsizing from a half rack to just a Synology + Intel nuc. I also pre-emptively switched from forwarded ports to a reverse proxy because I didn’t want to be thinking about what isp I would end up with. Even further, I linked the nas and nuc directly with Ethernet so that I wouldn’t need to rely on static IPs or router-assisted local hostnames, mdns, avahi, whatever because I wanted to be able to transplant my lab onto any network just in case of emergency - thankfully I haven’t had to test that out but it’s nice knowing my lab should work on any network where both boxes can reach the internet / my reverse proxy. I was thinking worst case if we ended up in some apartment complex with some crappy provided setup that had broken local discovery then it would be 1 less thing to worry about.

Don’t make me think about how much I’ve spent on VR and accessories…

I think the warning you might be thinking of is that a breaker can fail to pop if an inverter/generator is on the same circuit as a high wattage device. Since some energy would go directly from generation to device, the breaker will only see the “net” energy consumption. So if the generator puts out 1500W and the device decides to draw 3000W, a 15A breaker only sees 1500, and won’t trip even though the device is pulling way too much. If the breaker was sized for the wiring, then the wiring to that outlet could catch fire due to the breaker not tripping. That’s the main reason I know of why a generator or inverter should be on a dedicated circuit, to force the energy out one breaker and in another, so that the breaker can see an accurate measure of energy and trip when necessary.

Generally that’s fine and I agree, but one edge case that people overlook that I think is worth mentioning (and maybe what gp heard about and is trying to articulate) is that having an inverter or generator on the same circuit as a big energy consumer means that the breaker wouldn’t see the total energy being used by the consumer, and so it might not trip even if the consumer pulls too much wattage. That’s the main reason I know of why power sources should be on their own breaker - so it doesn’t hide power from the breaker but forces it to go out the generator circuit breaker and back in the consumer breaker so it can be protected properly.

Yeah I’ve tried those but it seems like such a hack. Weirdly, the one handed “pull screen into reach” doesn’t allow you to swipe down across the notifications bar to open notifications, in that mode it only registers swipes that start from below the notifications bar. And the floating button gets a little unwieldy since it overlaps with the volume popup. And in the “show notifications” mode, the button opens notifications but doesn’t let you close them (once you press it twice for the “control center” it no longer does anything)

Not to mention it doesn’t really help with the phone itself being uncomfortable to hold. I’m trying my best to vote with my wallet, but that has meant sticking with a Pixel 2 up until a few years ago, and the Pixel 5 was my “only 2mm taller” compromise - I completely overlooked the fact that the Pixel 2 screen starts like 1cm from the top while the Pixel 5 screen starts nearly at the top. The Pixel 10a is almost 10mm taller, so I’m not sure if I’ll be sold on it.

I actually bought a OnePlus 6 something (t?) at one point fully intending to give in to a bigger screen but I hated it and returned it.

I don’t use a case and I use Lineage. I’m not really concerned. I already need to crop the top of the screen in developer settings just so that I can reach the notification bar, I’m not really enthusiastic about getting something even bigger.

sad pixel 5 noises

I’ve been waiting for a camera bump free upgrade, the 10a might be it but I’m reluctant to continue up the phone size escalator.

My *arrstack DBs are part of my backed up portion, so they’ll remember what I have downloaded in my non-backed up portion.

Same here, ~30TB currently but my personal artifacts portion is only like 2TB, which is very affordable with rsync.net, which conveniently has an alerts setting if more than X kb hasn’t changed in Y days. (I have my Synology set up to spit out daily security reports to meet that amount, so even if I don’t change anything myself I won’t get bugged)

I only lament the potential loss of future HDR DSNP webrips 😔 but at least we’ll still have HDR from UHD rips

The most notable difference is that meshtastic has range in the order of miles. At least 1 mile even with bad antennas but with other nodes nearby to repeat your messages, 20 miles is not hard to do.

My homelab has been mostly on autopilot for a while. Synology 6 bay running most lighter weight docker stuff (arrstack, immich, etc) and an Intel nuc running heavy stuff (quicksync transcodes for Plex+jf, ollama). Both connected to digitalocean via WG for reverse proxy due to CGNAT.

I had my router SSD either die or get corrupted this past week, haven’t looked much at the old SSD besides trying to extract the config off of it. I ended up just fresh installing opnsense because I didnt have any recent backups (my Synology and nuc back up to rsync.net, but I haven’t gotten around to automated backups for my router since it’s basically a plain config, and my cloud reverse proxy which is just a basic docker compose + small haproxy config). Luckily my homelab reaching out to the cloud reverse proxy means there’s basically no important config on my router anymore, they just need DHCP and a connection.

Besides that the arrstack just chugs along on its own.

I recently figured out I can load jellyfin playback URLs into vrchat video players, either direct stream or through the transcoding pipeline as an m3u8 that live transcodes based on the url parameters you set. This is great because the way watch parties in VRChat works is that everyone in an instance loads the same URL pasted into media players and syncs the playback. That means you need to have a publicly accessible url (preferably with a token of some sort) that can be loaded by an arbitrary number of unique IP addresses simultaneously, which I don’t think is doable with Plex.

I’m now working on a little web app to let me log into Jellyfin, search/browse media, and generate the links with arbitrary or pre-set transcode settings for easy copy/pasting into VRChat. The reason it’s needed is that Jellyfin only provides the original file without transcoding when you use the “copy stream” option, so I believe the only way to get a transcoded stream url currently is to set the web interface to specific settings and grab the URL from the network. But that doesn’t let you set arbitrary stuff like codecs and subtitle burn in and overriding what it thinks you support. So a simple app to construct the URL will make VRChat watch parties a lot easier.

MS ❤️ Open Source

(/s)

gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme gimme

I remember going to defcon in 2016 and there was a guy wielding a foam sword with a qr code t-shirt that said “scan me”, and when you scanned it and told him it said “arrrr”, he’d beat you with the sword while berating you for scanning an untrusted code.

Damn I’m just realizing that was almost 10 years ago